Hi All
I have been tasked with getting the school Mirco CNC router working again.
I have all the old software and floppy disk security keys, I have checked the license with the denford software, it showed me I have VR CNC MILLING license.
I have downloaded VR milling v2 bought an external floppy disk drive installed the software while pointing it at the seckey.tff file but VR milling is coming up with the dongle/floppy disk not installed. I have tried transferring the key to a USB and that didn't work either
I have also tried the flash.in file transfer next but still not working. Is there anything else I can try?
I also have QuickCAM 2D Design and the seckey.tff worked fine when installed
VR Milling v2.32 not working with seckey.tff
Moderators: Martin, Steve, Mr Magoo
Re: VR Milling v2.32 not working with seckey.tff
I think the Seckey.tff license is for VR Milling version 5.
You can download it from the Denford website.
You can download it from the Denford website.
Re: VR Milling v2.32 not working with seckey.tff
Thnaks for the feedback. i have downloaded V5 and it wont install on windows 10 pro, tried it a few times but no luck