Help and advice for Denfords lathe control software VR Turning.
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Thu 22 Feb , 2007 17:31 pm
Check here to get latest version:
http://www.website.denford.ltd.uk/suppo ... -downloads
v1.17 changes:
- renamed control panel(s) from Control Panel to Machine Control - had a problem with a schools security system not allowing any windows to run called "control panel"
changed meteorns.mnt to work in CIM - chuck problems added And INSTATEX.DOOROPENSW:
added check in turnLineParser for too many Mcodes on one line
changed all DenStep machines to be control type 0 - not 5 which gives problems on NT/2000/XP - and doesn't use the data length checking
added glsceneviewer.free to get around an ati graphics bug
added check for new style registration key - seckey.tff ( to allow security license key to run under Vista )
-
giovaime
- Posts: 3
- Joined: Wed 11 Apr , 2007 0:24 am
Post
by giovaime » Wed 11 Apr , 2007 0:26 am
Denford Company don´t have a trial version?
I´m student from brazil. But i can´t use the program.
Have a license for stutend?
Tank´s..
Whait for awnser..
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse
-
Contact:
Post
by Denford Admin » Wed 11 Apr , 2007 10:52 am
Hi,
Try the demo version I have uploaded - details here:
viewtopic.php?p=2827
-
giovaime
- Posts: 3
- Joined: Wed 11 Apr , 2007 0:24 am
Post
by giovaime » Mon 16 Apr , 2007 17:53 pm
In demo version i can´t write in editor box.
I have to do a leason in piece of wood, i wrote my codes G e M..
i want to test and see if work´s my codes.
It´s possible in demo version?
Tanks.
-
Steve
- CNC Guru
![CNC Guru CNC Guru](./images/ranks/wiz3.gif)
- Posts: 1432
- Joined: Tue 21 Feb , 2006 16:15 pm
- Location: Denford UK
Post
by Steve » Tue 17 Apr , 2007 9:25 am
No the demo version only lets you work with the demo program.
The software demo is intended to let customers look at the functionallity of the software.
If we let the software simulate any program then no one would buy the full version.