Hi there,
I'm from malaysia. How are you graham? We having problem on CIM triac Fanuc which alarm msg display - 1008 Courasel Conflict. Please help me on this. Tq. Have a nice day.
CIM- TRIAC-Fanuc Problem
Moderators: Martin, Steve, Mr Magoo
CIM- TRIAC-Fanuc Problem
260699
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Hi Captain,
On a Fanuc 21i the 1008 alarm means that the carousel has gone out of sync. i.e. it has lost its position.
1. Take the tools out of the spindle and carousel pocket No1
2. Rotate the carousel with the CW and CCW buttons or M32 and M33 until carousel pocket No1 is in line with the spindle i.e. in its change tool position.
3. Use M27 to reset the carousel
On a Fanuc 21i the 1008 alarm means that the carousel has gone out of sync. i.e. it has lost its position.
1. Take the tools out of the spindle and carousel pocket No1
2. Rotate the carousel with the CW and CCW buttons or M32 and M33 until carousel pocket No1 is in line with the spindle i.e. in its change tool position.
3. Use M27 to reset the carousel