Installation problem!
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 3
- Joined: Mon 27 Mar , 2006 13:06 pm
- Location: Poland
Installation problem!
I have a problem concerning to VR CIM installation on my notebook (Polish version of Win XP Professional).
I can run VR world (any from five cim room levels), but I can't run any of host software (no Configurator, Dispatcher etc.).
There are appears message: "usage rights not found".
I use files: Flash_VR_CIM.exe and "SecKey.tff".
Can you help me?
I can run VR world (any from five cim room levels), but I can't run any of host software (no Configurator, Dispatcher etc.).
There are appears message: "usage rights not found".
I use files: Flash_VR_CIM.exe and "SecKey.tff".
Can you help me?
Best regards
Adam
Adam
-
- Posts: 3
- Joined: Mon 27 Mar , 2006 13:06 pm
- Location: Poland
Hi,
Thank you for your suggestions. Unfortunatelly, I still can't to run Host Software.
I installed VR Robot first, than VR Cim. I checked parameter NFDM=0.
Without effects.
My PC doesn't have floppy drive 3.5". I put all files from registration disc to VR CIM catalog.
When I use "Flash_VR_CIM.exe" all the time appears message:
"VR CIM has not been installed or cannot be found, do you wish to sarch for the config. file (cim.ini) your self?"
I put OK and use cim.ini file from VR CIM catalog. No errors. I can to start VR rooms, but I can't to start Host software. Always I get message:
"Usage rights not found".
Please answer as soon as possible.
Best regards
Adam
Thank you for your suggestions. Unfortunatelly, I still can't to run Host Software.
I installed VR Robot first, than VR Cim. I checked parameter NFDM=0.
Without effects.
My PC doesn't have floppy drive 3.5". I put all files from registration disc to VR CIM catalog.
When I use "Flash_VR_CIM.exe" all the time appears message:
"VR CIM has not been installed or cannot be found, do you wish to sarch for the config. file (cim.ini) your self?"
I put OK and use cim.ini file from VR CIM catalog. No errors. I can to start VR rooms, but I can't to start Host software. Always I get message:
"Usage rights not found".
Please answer as soon as possible.
Best regards
Adam
Best regards
Adam
Adam
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Hi Adam,
I have just done a clean install on an XP PC of both VR Robot and VR CIM and the both worked OK. The only thing i can see that would make a difference is the wrong Flash code. The Flash code on the 3-1\2" floppy
should look like this
Flash_CIM.exe
Can you confirm ?
Basic installation sequence
1. Install VR Robot
2. Run the Flash_CIM.exe from the 3-1\2" registration floppy disc
3. Install VR CIM
4. Make sure NFDM=0 in the CIM.ini file
If a window appears of the order " USER IDENTITY REGISTRATION" exit this and carry on installation sequence as above
Regards
Graham
I have just done a clean install on an XP PC of both VR Robot and VR CIM and the both worked OK. The only thing i can see that would make a difference is the wrong Flash code. The Flash code on the 3-1\2" floppy
should look like this
Flash_CIM.exe
Can you confirm ?
Basic installation sequence
1. Install VR Robot
2. Run the Flash_CIM.exe from the 3-1\2" registration floppy disc
3. Install VR CIM
4. Make sure NFDM=0 in the CIM.ini file
If a window appears of the order " USER IDENTITY REGISTRATION" exit this and carry on installation sequence as above
Regards
Graham
Last edited by bradders on Wed 29 Mar , 2006 16:05 pm, edited 1 time in total.
-
- Posts: 3
- Joined: Mon 27 Mar , 2006 13:06 pm
- Location: Poland
As I remember, VR CIM Software was sold in 2 levels
- VR CIM
- VR CIM with Host Control
The "VR CIM" version was supplied either as a Dongled version of Flashed version
The"VR CIM with Host Control" was only available as a Dongled version.
Which means that if you install the Flash information into "VR CIM with Host Control", the VR part will work OK, but the Host Control part will not work unless you have a Denford Dongle connected that has permissions to run the Denford CIM Host Control software. If the dongle does not have these permissions then your will get the error "Usage Rights Not Found".
I am sure that if you send to Denfords details of your purchase order on which you bought the original "VR CIM with Host Control" software they will be able to send you information about the correct dongle serial number you should be using.
- VR CIM
- VR CIM with Host Control
The "VR CIM" version was supplied either as a Dongled version of Flashed version
The"VR CIM with Host Control" was only available as a Dongled version.
Which means that if you install the Flash information into "VR CIM with Host Control", the VR part will work OK, but the Host Control part will not work unless you have a Denford Dongle connected that has permissions to run the Denford CIM Host Control software. If the dongle does not have these permissions then your will get the error "Usage Rights Not Found".
I am sure that if you send to Denfords details of your purchase order on which you bought the original "VR CIM with Host Control" software they will be able to send you information about the correct dongle serial number you should be using.