Up Plus 2 - Nozzle height Detect -Error Message
Posted: Wed 14 Oct , 2015 12:25 pm
HI, first thread for me!!
We are having trouble with our Up Plus 2 Printer.
When doing the nozzle height detect the table moves to back centre position and rises to allow the nozzle to touch the micro switch.
Although previously working well, it now doesn't stop and we get an error message POP UP.
The table had been tinkered with by a pupil!!! I have reset it with a DTI and refitted the head unit.
I have carried out an AUTO LEVEL process using the Magnetic attachment which appeared successful - told to set nozzle height which has been done but we keep getting the error message.
Any Ideas or suggestions as to the problem please.
Cheers
We are having trouble with our Up Plus 2 Printer.
When doing the nozzle height detect the table moves to back centre position and rises to allow the nozzle to touch the micro switch.
Although previously working well, it now doesn't stop and we get an error message POP UP.
The table had been tinkered with by a pupil!!! I have reset it with a DTI and refitted the head unit.
I have carried out an AUTO LEVEL process using the Magnetic attachment which appeared successful - told to set nozzle height which has been done but we keep getting the error message.
Any Ideas or suggestions as to the problem please.
Cheers