Printer stop with message nozzle too hot

Help with the hardware and software of the PP3DP UP! 3D Printer

Moderators: Martin, Steve, Mr Magoo

Post Reply
UKBSA
Posts: 1
Joined: Tue 21 Apr , 2020 13:23 pm
Hardware/Software: 3DP-14-4A / UP! Plus, Serial No.1224805, Rom:V6.070, Firmware V3.02

Printer stop with message nozzle too hot

Post by UKBSA » Tue 21 Apr , 2020 13:31 pm

Nozzle overheating (130%) after 10-20 secs of printing.
Extrudes manually in maintenance with no problem at steady 270deg.

Post Reply