keypad membrane

Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
graydog
CNC Apprentice
CNC Apprentice
Posts: 39
Joined: Tue 04 Dec , 2007 19:45 pm

keypad membrane

Post by graydog » Mon 25 Feb , 2013 21:10 pm

Evening boards,

does anyone have or know if I can buy a new/secondhand keypad membrane for the Zeroturn?

it is a bit in tatters, buttons work ok. But it wouldbe nice to have them covered.

Thanks
Graham

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: keypad membrane

Post by Martin » Mon 25 Feb , 2013 23:24 pm

I have never bought one but a quick Google search led me to the following.

http://fanuc.cnc-drives-controls.com.au ... 524-f.html

graydog
CNC Apprentice
CNC Apprentice
Posts: 39
Joined: Tue 04 Dec , 2007 19:45 pm

Re: keypad membrane

Post by graydog » Tue 26 Feb , 2013 9:26 am

will investigate...
thanks
G

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: keypad membrane

Post by Denford Admin » Tue 26 Feb , 2013 10:11 am

This company in the UK also do them:
http://fanuc.pennineuk.com/keysheet.htm

graydog
CNC Apprentice
CNC Apprentice
Posts: 39
Joined: Tue 04 Dec , 2007 19:45 pm

Re: keypad membrane

Post by graydog » Tue 26 Feb , 2013 10:38 am

alas they dont have any......

but ebay does
http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

Post Reply