Mill Machine ATC Spares

Any information regarding the Denford ZeroCentre ZeroTurn ZeroBore Fanuc CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
innovaw
Posts: 5
Joined: Mon 08 May , 2006 12:49 pm

Mill Machine ATC Spares

Post by innovaw » Mon 08 May , 2006 12:52 pm

I have a Denford Zerocentre.

I require Spares of the spring clips which hold the toolholders into the Tool Changer Carousel.

Can anybody help?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Tue 09 May , 2006 7:43 am

Unfortunalety we can no longer supply spare parts for this machine

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Tue 09 May , 2006 8:55 am

Bradders is right - we have had a look for the springs, but only have spares for our Triac tool changers.

The machine (and toolchanger) was imported by us from Taiwan, where we then fitted a Fanuc 0M B(?) control and drives system.
As it happens the agent we used is still in business :shock:
Luke Chen http://www.promach.com
Its worth a try contacting him.

Post Reply