Viceroy TDS/1/1/PCS/L metric gears for screwcutting.

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
ashant20
Posts: 2
Joined: Sun 26 Jan , 2020 15:21 pm

Viceroy TDS/1/1/PCS/L metric gears for screwcutting.

Post by ashant20 » Sun 26 Jan , 2020 15:30 pm

Hi all, I have the above machine with metric leadscrew, does anyone have a chart with the gear combination including stud and screw so I can screwcut. The leadscrew pitch is 3mm.

Post Reply