Hi,
My boyfriends granddad has left him the contents of his garage. In which the viceroy denford lathe has been stored.
We’re unaware of how much it is worth, and where to even think about finding a new home or someone willing to buy it.
Someone please help and advice us
I’m unable to add photos but please feel free to message so I can send some over! Have been advised could be worth between 200-300£
Lauren
Advice on viceroy TDS model maybe a TDS 3...
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 2
- Joined: Mon 04 Dec , 2017 14:43 pm
Re: Advice on viceroy TDS model maybe a TDS 3...
Hi Lauren,
You should be able to add photos by using the browse button when you're typing a post, just scroll down and look for it. You might have to re-size the photos first.
What area are you in? Someone might be able to come and take a look/give you advice.
Pete.
You should be able to add photos by using the browse button when you're typing a post, just scroll down and look for it. You might have to re-size the photos first.
What area are you in? Someone might be able to come and take a look/give you advice.
Pete.
Re: Advice on viceroy TDS model maybe a TDS 3...
TDS3 CWML. Combination plain-turning wood/metal lathe. £2-300 seems reasonable IMHO.
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: Advice on viceroy TDS model maybe a TDS 3...
I came across one of these on Ebay the other day. I'd never seen a combined wood and metal lathe before.
cant find it now so I think it must have sold
cant find it now so I think it must have sold
Re: Advice on viceroy TDS model maybe a TDS 3...
Indeed it did - £412 BUT it was already converted to single phase, came with two nice wood turning steadies , some timber dog drives and a set of chisels/gouges.TDIPower wrote:I came across one of these on Ebay the other day. I'd never seen a combined wood and metal lathe before.
cant find it now so I think it must have sold
http://r.ebay.com/a0K4ub
-
- Posts: 2
- Joined: Mon 04 Dec , 2017 14:43 pm
Re: Advice on viceroy TDS model maybe a TDS 3...
Hi everyone.
Thanks for your info etc.
We’re based in welling near to Bexleyheath near London.
I saw the TDS 3 lathe on eBay! And thought it was similar. I have done my research
And note that there’s not a great deal of info online for them!
I’m hoping me and my boyfriend can find a local buyer, were currently saving to move out!
We are unaware of whether the lathe is still in working order, and we couldn’t see any tools with the lathe itself.
Does anyone have any photos of the tools we may be looking for?
L
Thanks for your info etc.
We’re based in welling near to Bexleyheath near London.
I saw the TDS 3 lathe on eBay! And thought it was similar. I have done my research
And note that there’s not a great deal of info online for them!
I’m hoping me and my boyfriend can find a local buyer, were currently saving to move out!
We are unaware of whether the lathe is still in working order, and we couldn’t see any tools with the lathe itself.
Does anyone have any photos of the tools we may be looking for?
L
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: Advice on viceroy TDS model maybe a TDS 3...
A wood turning chisels, the wooden handle would be about 25cm 10" long
https://www.tklink.co.uk/products/tools ... gJ7y_D_BwE
https://www.tklink.co.uk/products/tools ... gJ7y_D_BwE