Help sought Viceroy AEW Horizon 3U Milling mc

All info relating to Viceroy machines - Lathes, sharpedge, drills etc...

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Help sought Viceroy AEW Horizon 3U Milling mc

Post by Denford Admin » Thu 03 Jun , 2010 13:48 pm

We have been asked:
Could you tell me if the handbook/parts list is still available for the AEW Denford Horizon Viceroy vertical milling machine please?
I can't find any relevant info here apart from this brochure:
Attachments
Viceroy-AEW-Horizontal-and-vertical-milling-machines.pdf
(281.91 KiB) Downloaded 1965 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Help sought Viceroy AEW Horizon 3U Milling mc

Post by Denford Admin » Thu 03 Jun , 2010 13:53 pm

It seems you may be able to buy a manual still from here:
http://www.lathes.co.uk/manuals/
MA454 AEW HORIZON Vertical and Horizontal Milling Machine. Operator's Manual. 2 editions are included covering both early and late machines. £35

MA454A AEW HORIZON Milling Machine. Illustrated Parts Manual £35

MA454B AEW HORIZON Milling Machine. Complete data pack including MA454 and MA454A above together with 6 works photographs of "show" machines. £45

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: Help sought Viceroy AEW Horizon 3U Milling mc

Post by Triac whizz » Fri 04 Jun , 2010 21:47 pm

It's a shame you don't have a pdf of thte manual about, as those on ebay could add it to their list :lol:


Slightly more seriously it would appear that mine is a 3U then. i wouldn't mind a slotting head - any sitting around? - drawings perhaps?
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

Post Reply