Hi,
Just resurrecting an old Turn 270 Pro. Using QuickTurn 2D Design and VR Turning - all up to date.
All works well with the RHT and profiles are good and accurate. The machine hangs when it goes for a tool change??
I have tried the easy upgrader for the firmware but "no suitable denford machine can be found' error appears.
Any ideas?
Many thanks
Pete
Turn 270 stopping at tool change
Moderators: Martin, Steve, Mr Magoo
Re: Turn 270 stopping at tool change
Does your machine have a manual toolpost or automatic toolpost fitted?
Check the settings in the VRTurning parameters.
Auto Changer in Tool Change section should be,
0 = Manual Toolpost.
1 = Automatic Toolpost.
Check the settings in the VRTurning parameters.
Auto Changer in Tool Change section should be,
0 = Manual Toolpost.
1 = Automatic Toolpost.