Upgrade Triac to Mach3

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
kranse
Posts: 4
Joined: Mon 22 Jan , 2007 21:56 pm

Upgrade Triac to Mach3

Post by kranse » Wed 28 Feb , 2007 8:13 am

Hi
Im uppgrading Triac 1986 to mach3. The X and Y movment works perfekt but i got problem wiht the Z movment. Is there anyone who know if there is any differences between SD2 and SD3 inputs.
/Janne
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Sat 03 Mar , 2007 5:01 am

same just more powerful, have you tried swopping the drives? quite likely that a drive has blown, probably why it was junked in the first place :?
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
kranse
Posts: 4
Joined: Mon 22 Jan , 2007 21:56 pm

Post by kranse » Tue 06 Mar , 2007 22:28 pm

Triac whizz wrote:same just more powerful, have you tried swopping the drives? quite likely that a drive has blown, probably why it was junked in the first place :?
Is there anyone who have the Electrical schematics for the drive?

janne
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Tue 06 Mar , 2007 22:32 pm

Try this post:

viewtopic.php?t=561
Top
Post Reply

Return to “Triac”