Hi
Im uppgrading Triac 1986 to mach3. The X and Y movment works perfekt but i got problem wiht the Z movment. Is there anyone who know if there is any differences between SD2 and SD3 inputs.
/Janne
Upgrade Triac to Mach3
Moderators: Martin, Steve, Mr Magoo
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
same just more powerful, have you tried swopping the drives? quite likely that a drive has blown, probably why it was junked in the first place
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
- Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: