REWARD FOR INFO

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
-=PAB=-
CNC Apprentice
CNC Apprentice
Posts: 82
Joined: Mon 19 Jun , 2006 19:46 pm

REWARD FOR INFO

Post by -=PAB=- » Tue 28 Nov , 2006 19:11 pm

i am offering a reward of £50 for anyone who can supply me with the correct dip switch settings for my TRIAC ATC (1990) the dip switches are located in the rear electrical cabinet door -please note my previous post and picshttp://denfordata.com/bb/viewtopic.php?t=518

regards, matt...

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Thu 30 Nov , 2006 11:11 am

It looks difficult, but could you get a (better) picture of the whole board ?

Can you also supply thing like board numbers / ID's / names - what is the DIP switch called on the PCB screen print ?

There are all kinds of PNC3 circuit digrams here, but I still can't find any switch setting tables or any board layouts that look like yours :?

A bit more info will make it easier to spot

Cheers

Post Reply