Hi,
How accurate is my Denford Triac ?
I would like to fit a high speed spindle so I can do engraving.
I have been asked what accuracy can I hold on my machiner but I am unsure what to reply.
accuracy
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 11
- Joined: Tue 28 Aug , 2018 15:50 pm
- Hardware/Software: Denford Triac
Quick Cam Pro
Vr Milling
Re: accuracy
Resolution will be down to 0.01m
The accuracy is difficult to quantify as this is a potential worse case scenario depending on the tolerances os all the parts.
Repeatability should be within 0.05
The accuracy is difficult to quantify as this is a potential worse case scenario depending on the tolerances os all the parts.
Repeatability should be within 0.05