TRIAC FANUC ATC 900´s parameters

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
ferguedes75
Posts: 1
Joined: Tue 20 Sep , 2016 14:14 pm
Hardware/Software: Software MasterCam
CIM- Includes - CICLONE FANUC LATHE, TRIAC FANUC ATC, CMM Machine, Conveyor, AS/RS, Slide, 2 Mitshubishi Robots.

TRIAC FANUC ATC 900´s parameters

Post by ferguedes75 » Tue 20 Sep , 2016 15:22 pm

Hi;
I need a help. I have got a TRIAC FANUC ATC, with the following characteristics, Model: TRIAC FANUC
Serial NO: EO4157
Despatach : November 1992
Export NO 4157
Serial NO of Electronics: 2050745
INSIDE ELECTRIC CABIN
Denford
FANUC Series 0-MC
Type A02B-0098-B511 N0. 2050745 Date 1992-05
Serial No. 2050745,
Memory board A16B-1212-0210/12C
I lost all the parameters, when I tried to replace from the backup, I realized that there are not the 900´s parameters.
Someone can send me those parameters.
I´m in a very big trouble, because I can´t carry on doing my tasks.
Many thanks.
All the best for you.
Fernando Guedes email: fernando.guedes@inesctec.pt

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: TRIAC FANUC ATC 900´s parameters

Post by Martin » Wed 21 Sep , 2016 17:19 pm

I can't find the folder belonging to your machine but looking through similar machines the 900 parameters all seem to be the same.

Don't forget you will also need to insert the relevant 450 diagnostics & set 453 bit 0 to a 1.
Attachments
TriacFanuc.pdf
(509.41 KiB) Downloaded 442 times

Post Reply