Spindle Bearings Fanuc Triac

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
CNC Apprentice
CNC Apprentice
Posts: 78
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Spindle Bearings Fanuc Triac

Post by jamesgates1000 » Thu 28 Jul , 2016 11:13 am

The spindle on my Triac is quite noisy, when taking a larger cut there is a rattly/grindy noise from the spindle housing.
Does anyone have some pictures of the spindle disassembly procedure?

Post Reply