SEM Spindle Motor

All info relating to the Denford Triac series of CNC milling machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
davemusicmann
Posts: 12
Joined: Thu 14 Jan , 2010 14:35 pm

SEM Spindle Motor

Post by davemusicmann » Wed 23 Mar , 2016 13:04 pm

I am having difficulty find information on a SEM type 30X2-44L spindle motor ( Photo of plate enclosed) can anyone help with information on identifying the wires coming out of the motor.
I have contacted SEM themselves who claim to had destroyed all information on obsolete motors can anyone please help.
Dave Mann
Attachments
scan0002.jpg
scan0002.jpg (236.3 KiB) Viewed 1985 times

Martin
CNC Guru
CNC Guru
Posts: 1678
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: SEM Spindle Motor

Post by Martin » Wed 23 Mar , 2016 13:08 pm

You Should have 6 wires.

2 x Armature
2 x Tacho
2 x Thermal trip

davemusicmann
Posts: 12
Joined: Thu 14 Jan , 2010 14:35 pm

Re: SEM Spindle Motor

Post by davemusicmann » Wed 23 Mar , 2016 17:34 pm

Thanks very much.
I know the armature wires which seem to have an earth wire,
but how can I identify the others?

Martin
CNC Guru
CNC Guru
Posts: 1678
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: SEM Spindle Motor

Post by Martin » Thu 24 Mar , 2016 10:33 am

The thermal wires should be a dead short & the tacho should give you a feedback of 9.5 volts DC per 1000rpm so if you put a meter on it & spin it manually you should see a change in the voltage.

davemusicmann
Posts: 12
Joined: Thu 14 Jan , 2010 14:35 pm

Re: SEM Spindle Motor

Post by davemusicmann » Fri 25 Mar , 2016 11:14 am

Thanks Martin that is perfect, I'll be able to sort this out now.
Thanks again and happy Easter.
Dave.

User avatar
Iron-Man
CNC Apprentice
CNC Apprentice
Posts: 68
Joined: Mon 28 Feb , 2011 9:40 am
Hardware/Software: Modified NovaTurn with Yaskawa AC Servos +-10V, PathPilot running on a GizmoSphere 1 with Ibob2 PCIE interface that I designed. Denford Triac to be modified with AC Servos.

Re: SEM Spindle Motor

Post by Iron-Man » Sat 26 Mar , 2016 20:28 pm

davemusicmann wrote:I am having difficulty find information on a SEM type 30X2-44L spindle motor ( Photo of plate enclosed) can anyone help with information on identifying the wires coming out of the motor.
I have contacted SEM themselves who claim to had destroyed all information on obsolete motors can anyone please help.
Dave Mann

Dave I have this manual but it does not have a lot of information.

It may help,

Iron-Man
Attachments
S.E.M. MT_Technical_Data_Manual.pdf
(1.94 MiB) Downloaded 333 times

Post Reply