Triac Feed-rate Override Pot

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
CNC Apprentice
CNC Apprentice
Posts: 78
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Triac Feed-rate Override Pot

Post by jamesgates1000 » Sun 20 Mar , 2016 15:20 pm

Hi, The feedrate Override pot on my Fanuc Triac doesnt seem to work. I have put an m49 in the beginning of my program to ensure that any M48 is cancelled but still does full feed regardless. Anyone know how I can check if the Pot is working?

Also I can copy Z position straight into the tool offset page with the EOB button, but does anyone know if I can also copy postion data straight into a program for example a G92 position?

Post Reply