Hi All
Finally got round to powering up a Denford Senior 200 that I have had sitting around now for 12 months. All powers up ok but I have a (NOT READY and an alarm 510 over travel).
Would really appreciate any help. The machine is 1990 with a fanuc ot control.
Cheers all
Mick
Denford senior 510 alarm
Moderators: Martin, Steve, Mr Magoo
-
jamesgates1000
- CNC Apprentice
- Posts: 87
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: Denford senior 510 alarm
Hi Mick,
I had this overtravel alarm on my triac, to solve it i took off the cover and wound the axis by hand off the limit switch and into the middle of its travel.
James
I had this overtravel alarm on my triac, to solve it i took off the cover and wound the axis by hand off the limit switch and into the middle of its travel.
James