Page 1 of 1
Riser block
Posted: Sun 04 Oct , 2015 19:23 pm
by mandor2013
I have a Triac PC made in 2002 with easy change tool holders. It is an excellent machine but I find lack of Z height a frequent problem. Has anyone fitted a riser block on one of these machines or could offer advice on fitting a riser block? Is there any diagrams available showing the fixing of the column to the base?
Re: Riser block
Posted: Wed 16 Dec , 2015 1:41 am
by MAINVIST
hi sir!
i made a riser block last year on mine, i can send you cad drawing of it for free
i don't use my triac so many time, it made just a couple of week since i can run it on mach3
Re: Riser block
Posted: Sat 09 Jan , 2016 12:33 pm
by Triac whizz
I did some years ago, sure I posted it on here. Search my posts.
without measuring, I think it was 50mm I added without having to remake cables, I can't remember how I lifted the column in place but it wasn't difficult.
Re: Riser block
Posted: Fri 05 Feb , 2016 0:29 am
by jamesgates1000
Here is the link to TriacWhizz's post...
viewtopic.php?t=318
Did the machine manage to find the tool carousel height on its own or did you have to tell it the offset?
Edit... Just had a look, obviously the he carousel is attached to the head so no calibration needed.
Re: Riser block
Posted: Mon 27 Mar , 2017 12:23 pm
by davidimurray
Would anyone happen to have drawings for the riser block?
Cheers
Dave