Spindle Pulley pitch/Spec

All info relating to the Denford Triac series of CNC milling machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 171
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Spindle Pulley pitch/Spec

Post by andy_con » Mon 03 Aug , 2015 19:31 pm

does anyone know the exact spec of the spindle/powered draw bar pulleys?

the belt has 18 teeth

belt reads

150 l
k9

gap between teeth on belt is about 5mm

im pretty sure the pitch is 5mm just wanted to check

Image

Image

Chaz
Posts: 7
Joined: Thu 04 Jun , 2015 12:41 pm
Hardware/Software: None, yet

Re: Spindle Pulley pitch/Spec

Post by Chaz » Mon 05 Oct , 2015 12:01 pm

Are you still looking for info on this? Ive got all the details at home, can upload them once I get home tonight if still needed.

andy_con
CNC Expert
CNC Expert
Posts: 171
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: Spindle Pulley pitch/Spec

Post by andy_con » Wed 07 Oct , 2015 23:06 pm

Chaz wrote:Are you still looking for info on this? Ive got all the details at home, can upload them once I get home tonight if still needed.
that would be handy thanks

Post Reply