triac atc pull stud dims

[ricey3]

Can anyone measure me up a pull stud from some bt30 tooling?

Got no tooling with my machine to know what size/angle pull studs i need to buy.

Cheers
Brendan

[ricey3]

I found out what the pull studs were by measuring off some dimensions on an on-screen photo of the triac spindle and finding a match on ebay.

Pull Studs specs which i've tested and work perfectly.

Thread.: M12x1.75
Shoulder Angle: 30 Deg
Full Length: 43mm (Knob dia: ~11mm)
Fitting dia.: 12.5mm
From shoulder to end of knob.: 23.2mm