triac atc pull stud dims

All info relating to the Denford Triac series of CNC milling machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
ricey3
Posts: 31
Joined: Wed 10 Apr , 2013 8:41 am
Hardware/Software: Starmill running mach3

triac atc pull stud dims

Post by ricey3 » Sun 03 May , 2015 20:54 pm

Can anyone measure me up a pull stud from some bt30 tooling?

Got no tooling with my machine to know what size/angle pull studs i need to buy.

Cheers
Brendan

ricey3
Posts: 31
Joined: Wed 10 Apr , 2013 8:41 am
Hardware/Software: Starmill running mach3

Re: triac atc pull stud dims

Post by ricey3 » Mon 01 Jun , 2015 8:52 am

I found out what the pull studs were by measuring off some dimensions on an on-screen photo of the triac spindle and finding a match on ebay.

Pull Studs specs which i've tested and work perfectly.

Thread.: M12x1.75
Shoulder Angle: 30 Deg
Full Length: 43mm (Knob dia: ~11mm)
Fitting dia.: 12.5mm
From shoulder to end of knob.: 23.2mm

Post Reply