does anyone know the motor denford put in these machines for 20000rpm?
Info Wanted on Triac 200
Moderators: Martin, Steve, Mr Magoo
Re: Info Wanted on Triac 200
It was a attachment we fitted to a normal head. If you look at the photograph you can see the red unit gear unit attached to the standard head.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Info Wanted on Triac 200
Interesting, thanks.
You dont have any of them attachments lying round in a back room somewhere do you?
You dont have any of them attachments lying round in a back room somewhere do you?
Re: Info Wanted on Triac 200
No, we must have ordered them as required.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Info Wanted on Triac 200
ah well, no worries. thanks
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Info Wanted on Triac 200
these speed multipliers come up on ebay every now and then Andy.
-
- CNC Expert
- Posts: 188
- Joined: Fri 05 Oct , 2012 20:06 pm
- Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC
Re: Info Wanted on Triac 200
Do they have an official name?