Page 1 of 1
Triac Spindle encoder, does it have one?
Posted: Sat 05 Oct , 2013 17:32 pm
by suesi34e
Does my 2000 Triac with 8 atc have a encoder on the spindle?
Many thanks guys
Steve
Re: Triac Spindle encoder, does it have one?
Posted: Sat 05 Oct , 2013 19:46 pm
by Martin
From memory we have only fitted a couple of encoders on Milling Machines so I would say no but if you post the serial number & some pictures I can confirm.
Re: Triac Spindle encoder, does it have one?
Posted: Sun 06 Oct , 2013 11:45 am
by suesi34e
Hi Martin
Thank you for your reply I appreciate it. I provide serial numbers and picture.
Machine serial No, H00741 Electrics serial No, OC 00253433
One other thing do you know anyone on the south coast that could convert my triac to mach 3, for payment of course.
Many thanks now
Steve
Re: Triac Spindle encoder, does it have one?
Posted: Mon 07 Oct , 2013 6:19 am
by Martin
No spindle encoder fittted.
Try Angel-Tec for the upgrade.
Re: Triac Spindle encoder, does it have one?
Posted: Mon 07 Oct , 2013 19:03 pm
by suesi34e
Dear Martin,
Many thanks for your help on this issue.
Best regards
Steve