RS232 communicator does not connect

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Bishops
Posts: 1
Joined: Fri 12 Oct , 2012 11:38 am
Hardware/Software: Triac PC

RS232 communicator does not connect

Post by Bishops » Tue 26 Mar , 2013 11:32 am

Triac PC. Installed V5 Milling and security key accepted. Should I be installing another driver or more software to enable communication ?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: RS232 communicator does not connect

Post by Denford Admin » Tue 26 Mar , 2013 13:16 pm

You may have the wrong machine selected in v5, there are no special drivers required for RS232 (as long as the COM port is enabled and active in windows)
See this post and look at the .pdf files in the first post.
viewtopic.php?f=2&t=2903

Post Reply