Triac Hydraulic fittings on the lubricating system

All info relating to the Denford Triac series of CNC milling machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
RNR107
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Triac Hydraulic fittings on the lubricating system

Post by RNR107 » Sat 15 Sep , 2012 14:12 pm

Hi all,
My Triac is leaking oil from one of the compression fittings of the lubricating system.
Looks like I need to replace a couple of them.
Any ideas what thread size they are? Looks like almost M8...

Ta,
Laurent

Martin
CNC Guru
CNC Guru
Posts: 1678
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac Hydraulic fittings on the lubricating system

Post by Martin » Tue 18 Sep , 2012 8:53 am

It should be a 1/8 gas.

RNR107
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Triac Hydraulic fittings on the lubricating system

Post by RNR107 » Tue 18 Sep , 2012 12:20 pm

Hi Martin,
What is "gas" thread ? do you mean BSP ?
1/8 BSP is too big...

Laurent

Post Reply