Triac drawbar 30 int thread pitch

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
ricky b
Posts: 9
Joined: Thu 15 Oct , 2009 15:44 pm

Triac drawbar 30 int thread pitch

Post by ricky b » Sat 26 Feb , 2011 11:07 am

Hi, could anybody tell me which thread draw bar the triac with 30 int tooling uses? thanks Rich

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Triac drawbar 30 int

Post by Denford Admin » Mon 28 Feb , 2011 10:55 am

M12 x 1.25 Pitch
Attachments
TR20_110.pdf
(68.47 KiB) Downloaded 679 times

ricky b
Posts: 9
Joined: Thu 15 Oct , 2009 15:44 pm

Re: Triac drawbar 30 int thread pitch

Post by ricky b » Tue 15 Mar , 2011 12:23 pm

Thanks for that!

Post Reply