Help please Triac CNC milling with ATC

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
jim the fish
Posts: 15
Joined: Sun 23 Jul , 2006 12:04 pm

Help please Triac CNC milling with ATC

Post by jim the fish » Sun 23 Jul , 2006 12:18 pm

Need a good repairer for my Y axis drive card, it not working, had it repaired 12 months ago but failed again. Fuses blow everytime I switch it on. Even with the plug to the motors disconnected. Has anyone a drive card for sale or can suggest a way of updating the drives. You are talking to an old engineer, so remeber if i can't see it I dont understand it, electronics beyond me so keep it simple.
The driver is a Parker Digiplan. the other two drivers work and by swaping the X card in the Y drive it seems to work the faulty axis.

Jim the fish
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Mon 24 Jul , 2006 17:41 pm

Is there a lable on the drive to say the model and current rating?

We may have one in our spares stock.
Top
jim the fish
Posts: 15
Joined: Sun 23 Jul , 2006 12:04 pm

stepper drive

Post by jim the fish » Tue 25 Jul , 2006 8:36 am

it has SD2/1
1321.060
WB-25711/004
Top
Post Reply

Return to “Triac”