Hello Help needed.
I’m currently working on a Triac VMC MILLER which has been upgraded to VME and using the VR CNC Milling software. Unfortunately, the software was reinstalled on the laptop because of sharing with a CNC router machine and now the 8 station carousel is out of sink with the tool library. I have tried toggling the carousal cw & ccw in the jog mode to bring back each tool highlighted in green but nothing seems to store etc. Does any one know any tricks to fix the problem? Thanks in anticipation.
triac vmc/e carousel out of sink with tool library
Moderators: Martin, Steve, Mr Magoo
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Re: triac vmc/e carousel out of sink with tool library
I think it's M27 that sets current tool to number 1 .. it's in the manual I believe if it's not M27 it's very close
best I can do from the old grey matter
best I can do from the old grey matter
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
Re: triac vmc/e carousel out of sink with tool library
It is M27.
You will need to index first to position 1 then execute a M27.
You will need to index first to position 1 then execute a M27.
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Re: triac vmc/e carousel out of sink with tool library
Thanks for confirming that my old grey matter still works Martin!
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com