Triac Lynx Drive

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
keith
Posts: 3
Joined: Tue 30 Oct , 2007 17:07 pm
Location: High Wycombe Bucks

Triac Lynx Drive

Post by keith » Wed 17 Feb , 2010 18:12 pm

Can anybody help i am in urgent need to repair or replace my lynx 08 drive on my 1988 Triac with a Fanuc 0M-B control.
Any leads would be much appreciated
Keith
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Triac Lynx Drive

Post by Denford Admin » Mon 08 Mar , 2010 10:56 am

I'm not sure if anyone has replaced or repaired these before...sweep replaced his drive as he was advertising them in the classifieds section.
We should be able to supply a Sprint1200 - Martin will be able to post up details
Top
Martin
CNC Guru
CNC Guru
Posts: 1898
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Triac Lynx Drive

Post by Martin » Mon 08 Mar , 2010 11:26 am

As Admin says we can supply a Sprint 1200 drive part number BI00307H. We should have them in stock.
Top
sweep
CNC Apprentice
CNC Apprentice
Posts: 96
Joined: Thu 16 Nov , 2006 20:33 pm
Location: Birkenshaw
Contact:
Contact sweep

Re: Triac Lynx Drive

Post by sweep » Fri 19 Mar , 2010 9:22 am

Transdrive of Oldham do a lot of DC stuff and repair and service exchange the Lynx stuff and do have the 08's.
I have supplied to them for a long time so mention my name, it cant do any harm.
Ask for Mathew Wren on 01706 881940 and mention "Richard from S.E.W."

...Richard
Top
Post Reply

Return to “Triac”