Hi all, just purchased a triac for a few hobby parts
Its from 11/1988.
Serial is either 354 or 554 just cant quite see it
Some pics here of it.
http://smg.photobucket.com/albums/0603/nthorpey/TRIAC/
Also I need a full list of G codes that this machine/control uses to write a post for it.
What is the serial wiring and connector type/part i need to allow me to transfer programs from my pc to the machine.
Many thanks in advance
Nick
Triac 1988
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3632
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Have a look at the thread "Orac serial connection" - I believe the Orac would be the same vintage hardware as your Triac.
Also see whats on our website (technical support) to download for the older machines (look under DOS software - no longer supported)
http://www.denford.co.uk/technical-support.asp
Also see whats on our website (technical support) to download for the older machines (look under DOS software - no longer supported)
http://www.denford.co.uk/technical-support.asp