Triac 7 pin din pinout

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
brgreenslade
Posts: 1
Joined: Fri 04 Apr , 2008 17:51 pm

Triac 7 pin din pinout

Post by brgreenslade » Fri 04 Apr , 2008 18:55 pm

Hi,

I am trying to make up a cable to connect my pnc3 based triac to a PC via rs232 but the 7 pin din connector I have bought has no pin markings so I cannot tell which is pin 1 and so on.
Can anyone help with a diagram which shows where the pins are?

Thanks

Barrie

Matt
CNC Apprentice
CNC Apprentice
Posts: 56
Joined: Sun 13 Aug , 2006 18:21 pm
Location: Kent UK
Contact:

Post by Matt » Fri 04 Apr , 2008 21:27 pm

Hi Barrie

Have another look at your connector. Normally it is written on the front in tiny tiny numbers. I would be very surprised if its not.

Regards

Matt

Post Reply