Starmill Setup

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
davisa
Posts: 3
Joined: Mon 05 Feb , 2007 12:17 pm

Starmill Setup

Post by davisa » Fri 16 Feb , 2007 11:30 am

I would like some basic knowlegde about setting up the machine:

How do you set the tool datum on the block you are machining?

Is the the spindle activation only done through the G code file?

What sort of Speeds and feeds will I achieve?

This will get me started.

Regards
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 16 Feb , 2007 16:02 pm

I can't find a manual that old.

Have you run the software MrMagoo pointed you to ? It looks like there may be some basic help in the Starmill SMCU software

Other than that, I guess you need help from someone else who is still using this system
Top
Post Reply

Return to “StarMill”