new problem on machine

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
gerrythewelshman2
Posts: 15
Joined: Sat 31 Aug , 2013 18:13 pm

new problem on machine

Post by gerrythewelshman2 » Sat 01 Mar , 2014 22:25 pm

Hi,
I now have my machine communicating and zero returning .

But I have a problem which I thought was an earth fault.
my machine was switching off my main power trip after 3mins ish.
but now it switches off my house trip switch after 1min.
I ran a new earth to ground nearer the machine and disconnected the old
earth to the house trip. but this did not work.
this happens even if I don't switch on the drives same 1min
it happens without the computer connected

Any help appreciated

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: new problem on machine

Post by angel-tech » Sun 02 Mar , 2014 1:04 am

try a type C breaker

Post Reply