Starmill advice?

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
mark274853
Posts: 1
Joined: Mon 28 Mar , 2011 10:01 am

Starmill advice?

Post by mark274853 » Tue 12 Apr , 2011 11:28 am

Good Morning,

I have saved a circa 1989 starmill from the scrapman, powered up the machine.............. seams to function correctly!

So I suppose my first question is, does anybody have a copy of the manual? second, can I obtain parts for the machine?

Many thanks

PS. I am not a novice in the use of CNC machines & associated software!

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Starmill advice?

Post by Denford Admin » Tue 12 Apr , 2011 13:49 pm

I've no idea what control that would have- what are you using to control it ? There are lots of DOS s/w manuals around here.
There is also a BBC user manual on here or try searching for a Novamill / DOS user manual
Or it could be North East Electronics ?
viewtopic.php?f=54&t=3272

Post Reply