STARMILL SOFTWARE & MAINTENANCE MANUAL BBC VERSION

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
alastairseggie
Posts: 14
Joined: Tue 01 Sep , 2009 9:53 am

STARMILL SOFTWARE & MAINTENANCE MANUAL BBC VERSION

Post by alastairseggie » Tue 01 Sep , 2009 23:24 pm

Hi All

Here is a scanned copy of the software and maintenance manual for my Starmill pictured below. It is for the BBC version running off an RS232 lead.

I hope this helps someone. Feel free to get intouch if you think I could be of assistance.

Regards
Attachments
Starmill manual.pdf
(2.4 MiB) Downloaded 3380 times
Starmill Electronics.jpg
Electronics Cabinet
Starmill Electronics.jpg (81.12 KiB) Viewed 12202 times
Starmill Front.jpg
front view
Starmill Front.jpg (46.68 KiB) Viewed 12202 times
Last edited by alastairseggie on Thu 12 Nov , 2009 7:06 am, edited 1 time in total.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: STARMILL SOFTWARE & MAINTENANCE MANUAL BBC VERSION

Post by bradders » Wed 02 Sep , 2009 6:59 am

Thanks for taking the time to upload the manuals :mrgreen: :mrgreen: :mrgreen:

ab-gelson
Posts: 1
Joined: Sat 04 Apr , 2015 17:36 pm

Re: STARMILL SOFTWARE & MAINTENANCE MANUAL BBC VERSION

Post by ab-gelson » Sat 04 Apr , 2015 20:10 pm

Hi

I have just purchased a starmill that has come with an old pc
Running DOS, can I down load a newer version and run through
A laptop with a serial convertor?
Also is the dongle still required? If so is this for license purposes?
Regards Andy

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: STARMILL SOFTWARE & MAINTENANCE MANUAL BBC VERSION

Post by bradders » Wed 08 Apr , 2015 12:05 pm

Denford's cannot off any sort of upgrade for such an old machine.

Post Reply