Hi,
My machine is cutting fine but after a job it stops at the end, router still spinning and does not home. I am having to do this manually. I'm sure it's something simple - any clues?
Thanks in advance
Not stopping and homing after a job
Moderators: Martin, Steve, Mr Magoo
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: Not stopping and homing after a job
Check the G code. Are the lines there to stop the spindle and home? if not its not the machine but how the code is being written
Pete
Pete
Re: Not stopping and homing after a job
How are you stopping the spindle at the end? Can you just enter jog mode?
It could be the communications have failed down the USB. What are you machining and are you running the extraction?
Is so try running without the extraction. It could be a static problem.
It could be the communications have failed down the USB. What are you machining and are you running the extraction?
Is so try running without the extraction. It could be a static problem.
Re: Not stopping and homing after a job
Worked fine today! Weird. I think a connection issue...
Thanks guys
Thanks guys