Vacum pad remains on!

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
Graeme
Posts: 23
Joined: Thu 01 Nov , 2012 22:48 pm
Hardware/Software: denford

Vacum pad remains on!

Post by Graeme » Wed 04 Sep , 2013 22:02 pm

Has anyone a solution to turning off the vacum pad? When the programme has finished I press the green lit button to deactivate the pad but there is no response; instead, the two methods that turn the pad off involve having to rehome all axis or use the emergancy off button; methods that i'm not comfortable with and logically appear unnecessary operationally.

Thanks

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Vacum pad remains on!

Post by Martin » Wed 04 Sep , 2013 23:42 pm

You need to turn the switch off then place the machine in Jog mode. The pump is latched trough the software when in Auto so it will not release mid program if pressed buy accident.

Post Reply