T Nut Size

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
StuartTresadern
Posts: 1
Joined: Wed 20 Mar , 2019 22:47 pm
Hardware/Software: Microrouter V3
ORAC Lathe

T Nut Size

Post by StuartTresadern » Wed 20 Mar , 2019 22:51 pm

Hi,
I've just acquired an ORAC lathe which is missing the correct T Nuts to hold down the ATC does anyone know the size of the nuts so that I can purchase some new ones.

Thanks Stuart.

Post Reply