Orac upgrade

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
cam1000
Posts: 2
Joined: Fri 24 May , 2013 23:26 pm

Orac upgrade

Post by cam1000 » Sat 25 May , 2013 0:07 am

Hello all. I have recently obtained an orac lathe that seems to be complete and works most times i get the code entered correctly but i want to upgrade to something more user fiendly like the mach3 i have seen others use. I have searched but have not found exactly what i am looking for. does anyone have a "shopping list" and directions on how to convert this to newer software while keeping as much origional conponents as possible. Thanks.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Orac upgrade

Post by Denford Admin » Mon 03 Jun , 2013 11:19 am

Lots of people have updated this type of machine..the main thing to search for is the control type. (use the google search box at the bottom of the forum)
There are other machine with the same control as yours that have been updated, so have a good look through this and the Triac and Starturn sections

RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Orac upgrade

Post by RNR107 » Wed 19 Jun , 2013 10:19 am

Hi cam1000,
Where are you based?
I can upgrade it for you... I am doing one myself right now.

Laurent

cam1000
Posts: 2
Joined: Fri 24 May , 2013 23:26 pm

Re: Orac upgrade

Post by cam1000 » Fri 21 Jun , 2013 2:13 am

RNR107 wrote:Hi cam1000,
Where are you based?
I can upgrade it for you... I am doing one myself right now.

Laurent
North Carolina. I would like to say i did it or most of it myself. Any help would be greatly appreciated!

RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Orac upgrade

Post by RNR107 » Fri 21 Jun , 2013 8:59 am

Looks like you are on the wrong side of the bridge mate! :roll: I am in UK...
I can help as much as I can...

Post Reply