Customer writes..................
Can you identify the Orac tool post manufacturer and if the tool holders are still available, if there are, do you know of a stockist in Greece
Can you identify the Orac tool post manufacturer
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Can you identify the Orac tool post manufacturer
- Attachments
-
- Orac Toolpost1.JPG (110.55 KiB) Viewed 5260 times
-
- Orac Toolpost.JPG (61.88 KiB) Viewed 5260 times
- Triac whizz
- CNC Expert
- Posts: 238
- Joined: Mon 17 Jul , 2006 21:48 pm
- Location: France
Re: Can you identify the Orac tool post manufacturer
Multifix, from the same place they make cuckoo clocks - switzerland
IMHO dickson are better and quicker to change, especially for a cnc.
IMHO dickson are better and quicker to change, especially for a cnc.
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
www.la-coterie.com
Re: Can you identify the Orac tool post manufacturer
We have some toolholders in old stock here!
We could put a package together if you are interested.
I will check what we have and maybe post a picture.
We could put a package together if you are interested.
I will check what we have and maybe post a picture.
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: Can you identify the Orac tool post manufacturer
Steve,
Where are they ? I found some different sized ones in the stores
Where are they ? I found some different sized ones in the stores