Help ! Novaturn

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Rich
CNC Apprentice
CNC Apprentice
Posts: 36
Joined: Sat 14 Apr , 2007 16:58 pm
Location: sheffield

Help ! Novaturn

Post by Rich » Wed 09 May , 2007 19:16 pm

Hello,
While moving a novaturn lathe in the machine shop I managed to catch the emg stop button on another machine and its come off!! IT dose'nt appear broken it seems to have come unclipped .I think it can be fixed I just can't see how you get to the assembly inside the machine casing to repair it? Very thankful for any help/advice.
Thanks. :oops:

nickyjones2
Posts: 16
Joined: Mon 16 Apr , 2007 9:12 am
Location: philippines

try these manual

Post by nickyjones2 » Thu 10 May , 2007 4:04 am

I've just uploaded a DOS turning manual here:
viewtopic.php?p=3108

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 10 May , 2007 10:07 am

On the inside of the Novaturn on the right hand side should be white plastic trunking. Removing the trunking lid should expose the rear of the E Stop button. If its an older E stop button then there will be a plastic nut that screws onto the rear of the E Stop button to clamp it to the sheet metal. Also on the rear of the E Stop button will be 2 removable contact blocks, ensure these are securely in place and the wires have not become detached

Post Reply