Novaturn Auto toolchanger tool sizes

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
bpmsl
CNC Expert
CNC Expert
Posts: 141
Joined: Mon 16 Nov , 2009 10:00 am

Novaturn Auto toolchanger tool sizes

Post by bpmsl » Wed 13 Apr , 2011 20:56 pm

Just to confirm 12mm square for external tools and 18mm dia for boring bars?
Cheers
Barry M

User avatar
Denford Admin
Site Admin
Posts: 3595
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Novaturn Auto toolchanger too sizes

Post by Denford Admin » Thu 14 Apr , 2011 8:50 am

Yes 12mm sq for turning tools
Boring tool holders use a 19mm (OD) bush - we have only supported up to 12mm diam. bars though

bpmsl
CNC Expert
CNC Expert
Posts: 141
Joined: Mon 16 Nov , 2009 10:00 am

Re: Novaturn Auto toolchanger too sizes

Post by bpmsl » Sat 16 Apr , 2011 22:56 pm

thanks. Do you still sell the 12mm bushes, or can you provide drawings for me to make some?
Thanks.
Barry m

User avatar
Denford Admin
Site Admin
Posts: 3595
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Novaturn Auto toolchanger too sizes

Post by Denford Admin » Wed 20 Apr , 2011 13:51 pm


bpmsl
CNC Expert
CNC Expert
Posts: 141
Joined: Mon 16 Nov , 2009 10:00 am

Re: Novaturn Auto toolchanger too sizes

Post by bpmsl » Thu 21 Apr , 2011 14:13 pm

excellent thanks v much.

Post Reply