A low profile, flat modular clamping system/vice for Novamil

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Joe Pineapples
Posts: 8
Joined: Fri 15 Jul , 2016 12:45 pm
Hardware/Software: Hardware;
Denford Novamill
Haas Minimill
Haas Super Minimill 2
XYZ Proturn 350 lathe
Nokia 3310 with custom ringtone

Software;
Mach3
Mastercam

A low profile, flat modular clamping system/vice for Novamil

Post by Joe Pineapples » Sat 16 Jul , 2016 12:41 pm

Hi all, just bought myself a Novamill (been looking for one for ages), first thing I noticed is the limited Z travel. I intend to raise the column at some point, in the mean time I was looking for a low profile vice but was unable to find one that matched my needs.
That led to me making my own, a steel bed with a grid of tapped M8 holes, able to take finger clamps from many angles and positions. Also made a pair of vice jaws - one you clamp down tight (and square), the other uses off-centre camhead bolts to close the jaw onto the part (I made these bolts myself). These can be placed at various widths on the bed, see photos attached.
clampbed2.jpg
clampbed2.jpg (664.49 KiB) Viewed 10765 times
Attachments
clampbed1.jpg
clampbed1.jpg (726.19 KiB) Viewed 10765 times

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: A low profile, flat modular clamping system/vice for Nov

Post by angel-tech » Sun 17 Jul , 2016 13:57 pm

the vices sold with the boxford 190 and 240 are pretty good for the novamill, the one supplied with the 190 is slightly smaller. If you go on the boxford website you can see the exploded view of the vice.

Joe Pineapples
Posts: 8
Joined: Fri 15 Jul , 2016 12:45 pm
Hardware/Software: Hardware;
Denford Novamill
Haas Minimill
Haas Super Minimill 2
XYZ Proturn 350 lathe
Nokia 3310 with custom ringtone

Software;
Mach3
Mastercam

Re: A low profile, flat modular clamping system/vice for Nov

Post by Joe Pineapples » Sun 17 Jul , 2016 21:45 pm

angel-tech wrote:the vices sold with the boxford 190 and 240 are pretty good for the novamill, the one supplied with the 190 is slightly smaller. If you go on the boxford website you can see the exploded view of the vice.
Thanks, just had a look at them. I'd already made this one though and (for my purposes at least) it's much better (lower profile with a wider capacity). I actually have an old vice very similar to the one supplied with the 190, I was using it on the Novamill for a few days before I made the modular vice.

Ben L
CNC Apprentice
CNC Apprentice
Posts: 53
Joined: Tue 23 Aug , 2016 23:13 pm
Hardware/Software: Novamill - Mach 3

Re: A low profile, flat modular clamping system/vice for Nov

Post by Ben L » Fri 26 Aug , 2016 16:28 pm

Joe I would love one of these for my Novamill fancy a commission to make me one? I hadnt realised just how tight the z depth would be once there is some tool length theres not much room to play :o

I'm serious about buying one from you if you fancy it

Joe Pineapples
Posts: 8
Joined: Fri 15 Jul , 2016 12:45 pm
Hardware/Software: Hardware;
Denford Novamill
Haas Minimill
Haas Super Minimill 2
XYZ Proturn 350 lathe
Nokia 3310 with custom ringtone

Software;
Mach3
Mastercam

Re: A low profile, flat modular clamping system/vice for Nov

Post by Joe Pineapples » Fri 30 Sep , 2016 14:16 pm

Ben L wrote:Joe I would love one of these for my Novamill fancy a commission to make me one? I hadnt realised just how tight the z depth would be once there is some tool length theres not much room to play :o

I'm serious about buying one from you if you fancy it
Hi Ben, sorry for the delay. Whereabouts are you? I won't have time to make a new one buty I actually have a spare base plate, with the holes all drilled and tapped. You can have that for nowt, if you want it and I'll give you the drawings/files to make your own jaws.
I'm in Sheffield by the way.

Ben L
CNC Apprentice
CNC Apprentice
Posts: 53
Joined: Tue 23 Aug , 2016 23:13 pm
Hardware/Software: Novamill - Mach 3

Re: A low profile, flat modular clamping system/vice for Nov

Post by Ben L » Sat 01 Oct , 2016 12:19 pm

Joe Pineapples wrote:
Ben L wrote:Joe I would love one of these for my Novamill fancy a commission to make me one? I hadnt realised just how tight the z depth would be once there is some tool length theres not much room to play :o

I'm serious about buying one from you if you fancy it
Hi Ben, sorry for the delay. Whereabouts are you? I won't have time to make a new one buty I actually have a spare base plate, with the holes all drilled and tapped. You can have that for nowt, if you want it and I'll give you the drawings/files to make your own jaws.
I'm in Sheffield by the way.
Hi Jow thanks for the reply :) I'm way down south from you near Southampton, but I guess it could be posted, I would be really interested in buying it from you.
Cheers
Ben

Joe Pineapples
Posts: 8
Joined: Fri 15 Jul , 2016 12:45 pm
Hardware/Software: Hardware;
Denford Novamill
Haas Minimill
Haas Super Minimill 2
XYZ Proturn 350 lathe
Nokia 3310 with custom ringtone

Software;
Mach3
Mastercam

Re: A low profile, flat modular clamping system/vice for Nov

Post by Joe Pineapples » Mon 10 Oct , 2016 10:18 am

Ben L wrote:
Joe Pineapples wrote:
Ben L wrote:Joe I would love one of these for my Novamill fancy a commission to make me one? I hadnt realised just how tight the z depth would be once there is some tool length theres not much room to play :o

I'm serious about buying one from you if you fancy it
Hi Ben, sorry for the delay. Whereabouts are you? I won't have time to make a new one buty I actually have a spare base plate, with the holes all drilled and tapped. You can have that for nowt, if you want it and I'll give you the drawings/files to make your own jaws.
I'm in Sheffield by the way.
Hi Jow thanks for the reply :) I'm way down south from you near Southampton, but I guess it could be posted, I would be really interested in buying it from you.
Cheers
Ben
Hi Ben, sent you a PM with details.

Ben L
CNC Apprentice
CNC Apprentice
Posts: 53
Joined: Tue 23 Aug , 2016 23:13 pm
Hardware/Software: Novamill - Mach 3

Re: A low profile, flat modular clamping system/vice for Nov

Post by Ben L » Thu 03 Nov , 2016 1:48 am

Cheers Joe, I sent you an email :)

madebymccoy
Posts: 27
Joined: Tue 13 Dec , 2016 23:36 pm
Hardware/Software: Novamill
- in process of upgrading controller to Mesa I/O and LinuxCNC
- retrofitting head with power drawbar
- and next year, raise column by 70mm

Microrouter V3

Micromill 2000

Re: A low profile, flat modular clamping system/vice for Nov

Post by madebymccoy » Tue 13 Dec , 2016 23:39 pm

Hi Joe

The table looks great! Any chance of posting the drawings or sending me them? I'm struggling to find a vice or good quality low profile repeatable system, and this looks ideal.

Thanks
Jon

Joe Pineapples
Posts: 8
Joined: Fri 15 Jul , 2016 12:45 pm
Hardware/Software: Hardware;
Denford Novamill
Haas Minimill
Haas Super Minimill 2
XYZ Proturn 350 lathe
Nokia 3310 with custom ringtone

Software;
Mach3
Mastercam

Re: A low profile, flat modular clamping system/vice for Nov

Post by Joe Pineapples » Mon 13 Feb , 2017 23:47 pm

madebymccoy wrote:Hi Joe

The table looks great! Any chance of posting the drawings or sending me them? I'm struggling to find a vice or good quality low profile repeatable system, and this looks ideal.

Thanks
Jon
Hi Jon, yes I'll see if I can upload the files to here for anyone who it might be useful to. Apologies for the big delay, I've been incredibly busy. In the coming days/weeks though I'll be posting some information about several mods I've made to my machine which I believe some may find very useful, stay tuned :wink:

@Ben L, as above my apologies. Have sent you another email :)
Attachments
Clamping jaws.pdf
(153.21 KiB) Downloaded 624 times
Clamping bed.pdf
(186.55 KiB) Downloaded 595 times

Post Reply