Novamill equivalent stepper motors

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Novamill equivalent stepper motors

Post by bradders » Thu 16 May , 2013 14:05 pm

Customer Enquires................

Does anyone know of equivalent stepper motors to replace the ones below on and old Novamill?

Phase Make Model Volt AC/DC
x-axis SANYO 103-770-1640 30 DC
y-axis SANYO 103-770-1640 30 DC
z-axis SANYO 103-807-0645 30 DC

RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: Novamill equivalent stepper motors

Post by RNR107 » Tue 28 May , 2013 22:11 pm

Hi bradders,
Steppers on the Nova are really tiny...
So any Nema23 motors would do for X
For Y it is a bit more tricky as you need to watch the lengh of the motor as the physical size is limitted inside the column.
For Z it is a Nema34

These should work:
For X and Y:
http://www.zappautomation.co.uk/en/nema ... motor.html
For Z:
http://www.zappautomation.co.uk/en/nema ... 5904b.html

Laurent

Post Reply