Customer Enquires................
Does anyone know of equivalent stepper motors to replace the ones below on and old Novamill?
Phase Make Model Volt AC/DC
x-axis SANYO 103-770-1640 30 DC
y-axis SANYO 103-770-1640 30 DC
z-axis SANYO 103-807-0645 30 DC
Novamill equivalent stepper motors
Moderators: Martin, Steve, Mr Magoo
-
RNR107
- CNC Apprentice
- Posts: 42
- Joined: Mon 21 Feb , 2011 9:22 am
- Hardware/Software: TRIAC, ORAC, Mach3
- Location: West Yorshire
Re: Novamill equivalent stepper motors
Hi bradders,
Steppers on the Nova are really tiny...
So any Nema23 motors would do for X
For Y it is a bit more tricky as you need to watch the lengh of the motor as the physical size is limitted inside the column.
For Z it is a Nema34
These should work:
For X and Y:
https://www.zappautomation.co.uk/en/nema ... motor.html
For Z:
https://www.zappautomation.co.uk/en/nema ... 5904b.html
Laurent
Steppers on the Nova are really tiny...
So any Nema23 motors would do for X
For Y it is a bit more tricky as you need to watch the lengh of the motor as the physical size is limitted inside the column.
For Z it is a Nema34
These should work:
For X and Y:
https://www.zappautomation.co.uk/en/nema ... motor.html
For Z:
https://www.zappautomation.co.uk/en/nema ... 5904b.html
Laurent