Novamill Wiring

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Novamill Wiring

Post by boots » Wed 29 Oct , 2008 19:40 pm

Good Day,
I have a customer who has called in to say that VAC is not being supplied to the machine. She has "opened up the box"(converter) and found a blue wire that is disconnected. Is there any way to get the schematics for this machine? Can you tell me what the blue wire is for? where it goes or should go?

Are there any wiring diagrams in pdf format that I can download?

Thanks for your attention to this matter,
Top
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1439
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 31 Oct , 2008 10:41 am

What VAC are you talking about? Can you provide a photo of the electrical box?

I do not know why there would be a VAC on a NovaMill other than robotics?? This may not be factory wired?
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Fri 31 Oct , 2008 15:58 pm

Have uploaded the novamill nextstep electrical drawings:
viewtopic.php?t=1834
Top
Post Reply

Return to “Novamill”